Percorrer por autor "Naidis, G. V."
A mostrar 1 - 10 de 13
Resultados por página
Opções de ordenação
- Comment on “Electric field measurements under DC corona discharges in ambient air by electric field induced second harmonic generation” [Appl. Phys. Lett. 115, 244101 (2019)]Publication . Ferreira, N. G. C.; Almeida, P. G. C.; Benilov, M. S.; Naidis, G. V.
- Investigating near-anode plasma layers of very high-pressure arc dischargesPublication . Almeida, N. A.; Benilov, M. S.; Hechtfischer, U.; Naidis, G. V.Numerical and experimental investigation of near-anode layers of very high-pressure arcs in mercury and xenon is reported. The simulation is performed by means of a recently developed numerical model in which the whole of a near-electrode layer is simulated in the framework of a single set of equations without simplifying assumptions such as thermal equilibrium, ionization equilibrium and quasi-neutrality and which was used previously for a simulation of the near-cathode plasma layers. The simulation results support the general understanding of similarities and differences between plasma–cathode and plasma–anode interaction in high-pressure arc discharges established in preceding works. In particular, the anode power input is governed primarily by, and is approximately proportional to, the arc current. In the experiment, the spectral radiance from the electrodes and the near-electrode regions in xenon arcs was recorded. The derived total anode power input and near-anode plasma radiance distribution agree reasonably well with the simulation results.
- Modelling current transfer to cathodes in metal halide plasmasPublication . Benilov, M. S.; Cunha, M D; Naidis, G. V.This work is concerned with investigation of the main features of current transfer to cathodes under conditions characteristic of metal halide (MH) lamps. It is found that the presence of MHs in the gas phase results in a small decrease of the cathode surface temperature and of the near-cathode voltage drop in the diffuse mode of current transfer; the range of stability of the diffuse mode expands. Effects caused by a variation of the work function of the cathode surface owing to formation of a monolayer of alkali metal atoms on the surface are studied for particular cases where the monolayer is composed of sodium or caesium. It is found that the formation of the sodium monolayer affects the diffuse mode of current transfer only moderately and in the same direction that the presence of metal atoms in the gas phase affects it. Formation of the caesium monolayer produces a dramatic effect: the cathode surface temperature decreases very strongly, the diffuse-mode current–voltage characteristic becomes N–S-shaped.
- Modelling interaction of multispecies plasmas with thermionic cathodesPublication . Benilov, M. S.; Cunha, M. D.; Naidis, G. V.The model of the near-cathode plasma, developed previously for the case of a single-species plasma-producing gas, is generalized for the case of multiple plasma-producing species. Results are presented of calculation of a diffuse mode of current transfer to tungsten cathodes in a mercury plasma with an addition of sodium. It is found that the presence of 1% of sodium results in a considerable expansion of the range of stability of the diffuse mode.
- Numerical investigation of stability of low-current needle-to-plane negative corona discharges in airPublication . Ferreira, N. G. C.; Almeida, P. G. C.; Taher, A. Eivazpour; Naidis, G. V.; Benilov, M. S .; Ferreira, Nuno; Almeida, Pedro G C; Benilov, Mikhail; Benilov, MikhailAbstract Negative DC corona discharges are known for their self-pulsing regime: the Trichel pulses. In some works, pulsed regimes, stochastic or periodic, have been observed immediately upon the inception of the discharge, while in other works the discharge was found to be ignited in a steady-state (pulseless) mode, with the Trichel pulses developing at higher voltages. Recent theoretical and modeling work showed that the stationary negative corona between concentric cylinders in atmospheric-pressure air is stable immediately after the ignition. The pulseless mode was found also in the modeling of the needle-to-plane geometry, however in a quite narrow voltage range. This work studies conditions for a pulseless negative corona discharge in a needle-to-plane geometry to occur over a wide range of voltages, which will facilitate its unambiguous observation in the experiment. After the negative corona loses stability, the current evolution shows, after a small region of quasi-harmonic oscillations, pulses. These can be of small amplitude or regular Trichel pulses, which develop via standing-wave or ionization-wave mechanisms. Modeling results agree with available experimental data, both for the current–voltage characteristics and the stability limit of the pulseless negative corona discharge. An insight is given into stochastic Trichel pulses, which have been observed in experiments under certain conditions.
- A practical guide to modeling low-current quasi-stationary gas discharges: Eigenvalue, stationary, and time-dependent solversPublication . Benilov, M. S.; Almeida, P. G. C.; Ferreira, N. G. C.; Almeida, R. M. S.; Naidis, G. V.The work is concerned with the modeling of low-current quasi-stationary discharges, including the Townsend and corona discharges. The aim is to develop an integrated approach suitable for the computation of the whole range of existence of a quasi-stationary discharge from its inception to a non-stationary transition to another discharge form, such as a transition from the Townsend discharge to a normal glow discharge or the corona-to-streamer transition. This task includes three steps: (i) modeling of the ignition of a self-sustaining discharge, (ii) modeling of the quasi-stationary evolution of the discharge with increasing current, and (iii) the determination of the current range where the quasi-stationary discharge becomes unstable and the non-stationary transition to another discharge form begins. Each of these three steps is considered in some detail with a number of examples, referring mostly to discharges in high-pressure air.
- Reply to the Comment on ‘What is the mathematical meaning of Steenbeck's principle of minimum power in gas discharge physics?’Publication . Benilov, M. S.; Naidis, G. V.
- Simple computation of ignition voltage of self-sustaining gas dischargesPublication . Almeida, P. G. C.; Almeida, R. M. S.; Ferreira, N. G. C.; Naidis, G. V.; Benilov, M. S.A robust, fast, and accurate numerical method is proposed for finding the voltage of the ignition of DC self-sustaining gas discharges in a wide range of conditions. The method is based on physical grounds and builds up from the idea that the ignition of a self-sustaining gas discharge should be associated with a resonance that would occur in a non-self-sustained discharge in the same electrode configuration. Examples of the application of the method are shown for various configurations: parallel-plate discharge, coaxial and wire-to-plane corona discharges, and a discharge along a dielectric surface. The results conform to the conventional Townsend breakdown condition for the parallel-plate configuration and are in good agreement with existing experimental data for the other configurations. The method has the potential of providing a reference point for optimization of the hold-off capability of high-power switchgear operating in low-frequency fields.
- Simulation of pre-breakdown discharges in high-pressure air. I: The model and its application to corona inceptionPublication . Ferreira, N. G. C.; Santos, D. F. N.; Almeida, P. G. C.; Naidis, G. V.; Benilov, M. S.A ‘minimal’ kinetic model of plasmachemical processes in low-current discharges in high pressure air is formulated, which takes into account electrons, an effective species of positive ions, and three species of negative ions. The model is implemented as a part of numerical model of low-current quasi-stationary discharges in high-pressure air based on the use of stationary solvers, which offer important advantages in simulations of steady-state discharges compared to standard approaches that rely on time-dependent solvers. The model is validated by comparison of the computed inception voltage of corona discharges with several sets of experimental data on glow coronas. A good agreement with the experiment has been obtained for positive coronas between concentric cylinders in a wide range of pressures and diameters of the cylinders. The sensitivity of the computation results with respect to different factors is illustrated. Inception voltages of negative coronas, computed using the values of the secondary electron emission coefficient of 10−4 –10−3 , agree well with the experimental data. A simplified kinetic model for corona discharges in air, which does not include conservation equations for negative ion species, has been proposed and validated. Modelling of positive coronas in rod-to-plane electrode configuration has been performed and the computed inception voltage was compared with experimental data.
- Simulation of pre-breakdown discharges in high-pressure air: II. Effect of surface protrusionsPublication . Ferreira, N. G. C.; Naidis, G. V.; Benilov, M. S.Analysis of deviations from the similarity law, observed at high and very high pressures in experiments on discharge ignition and breakdown in corona-like configurations, can serve as a useful, albeit inevitably indirect, source of information about microprotrusions on the surface of the electrodes. In this work, such analysis was performed by means of 2D numerical modelling. Conical or cylindrical protrusions on the surface of the inner electrode were studied and the kinetic scheme includes the electrons, one species of positive ions, and negative ions O− 2 , O−, and O− 3 . It is shown that the deviations from the similarity law, observed in the experiment, may indeed be attributed to enhanced ionization of air molecules in regions of amplified electric field near the microprotrusions. A qualitative agreement with the experiment in all the cases is achieved for protrusion heights of the order of 50 µm. Such values may appear rather high, however there is no other explanation in sight at present. The enhancement of the field electron emission from the surface of the negative electrode due to the amplification of the electric field on the microprotrusion was estimated and found insignificant in the range of values of the protrusion aspect ratio where the enhanced ionization in the gas phase is already appreciable.