Loading...
31 results
Search Results
Now showing 1 - 10 of 31
- Suberin-based polyurethanes: synthesis, characterization and kinetics of their formationPublication . Cordeiro, N.; Belgacem, M. N.; Gandini, A.; Pascoal Neto, C.
- Fraccionamento da cortiça e caracterização dos seus componentes: estudo de possibilidades de valorização suberinaPublication . Cordeiro, Nereida Maria Abano
- Urethanes and polyurethanes from suberin 2: synthesis and characterizationPublication . Cordeiro, N.; Belgacem, M.N.; Gandini, A.; Pascoal Neto, C.Polyurethanes based on suberin from cork of Quercus suber L. and conventional isocyanate monomers were prepared and fully characterized in terms of both structure (FTIR and 1 H NMR spectroscopy) and thermal properties (differential scanning calorimetry and thermogravimetric analysis). Two fractions were systematically isolated, namely (i) methylene-chloride soluble products, which corresponded to linear and branched macromolecules and (ii) methylene-chloride insoluble products, representing the crosslinked material. The structures of these polymers were regular and no appreciable side reactions were detected. DSC analyses provided information about the glass transition temperature of both fractions and this parameter was correlated with the stiffness of the isocyanate used. The TGA of these polyurethanes showed that they started to degrade at about 175°C and that the residue at 400°C was around 50%. The highest amounts of insoluble fractions, as well as the highest Tgs, were reached when an initial [NCO]/[OH] of unity was used.
- Products of the permanganate oxidation of Cork, desuberized Cork, suberin and lignin from Quercus suber L.Publication . Lopes, M.; Neto, C. Pascoal; Evtuguin, D.; Silvestre, A. J. D.; Gil, A.; Cordeiro, N.; Gandini, A.
- The organosolv fractionation of cork componentsPublication . Cordeiro, Nereid; Neto, Carlos Pascoal; Rocha, Joao; Belgacem, Mohamed N.; Gandini, AlessandroExtractive-free cork from Quercus suber L. was submitted to organosolv fractionation and the effects of different process variables, such as ethanol/water ratio, temperature, time and the presence of acidic or alkaline catalysts, were studied. The variation of the relative proportions of extracted components, as a function of the processing conditions, could thus be established. Whereas the addition of 0.1 M acetic acid only increased the yield of extracted materials from about 15 to 23%, the use of sodium hydroxide, at the same concentration, produced a jump to 76%. In the case of the alkaline organosolv fractiona tion, an increase in process temperature, time and catalyst concentration led to an increase in the extraction yield, although in some cases this increase did not follow a sustained trend, as in the case of reaction time. Increasing the ethanol/water ratio led to a higher selectivity in favour of suberin extraction. Residual cork from different organosolv processes was characterised by FTIR and 13C solid-state NMR. The latter technique provided some valuable information about both process selectivity and cork morphology, particularly with respect to the positioning of suberin macromolecules in the cell wall.
- Surface properties of suberinPublication . Cordeiro, Nereida; Aurenty, Patrice; Belgacem, Mohamed Naceur; Gandini, Alessandro; Neto, Carlos PascoalThe surface energy of suberin was determined by four different methods, namely, (i) contact angle measurements, (ii) Wilhelmy plate measurements, (iii) maximum bubble pressure, and (iv) inverse gas chromatography (IGC). The first three methods gave a gammasub value in the range 40-50 mN m-1 at room temperature. The major component of this value reflects the dispersive contribution. The IGC measurements showed a higher dispersive term, which is common with this method of characterization. The surface acid (A)/base (B) properties were also evaluated, and the results indicated that suberin has an acidic character.
- Cork suberin as a new source of chemicals.: 1. isolation and chemical characterization of its compositionPublication . Cordeiro, N.; Belgacem, M.N.; Silvestre, A.J.D.; Pascoal Neto, C.; Gandini, A.Extractive-free cork from Quercus suber L. was submitted to a solvolysis treatment with methanolic NaOH which yielded 37% (o.d. cork) of suberin. This mixture of compounds was thoroughly characterized by FTIR, 1 H- and 13C-NMR, gas chromatogra phy coupled with mass spectrometric (GC–MS) analysis, vapour pressure osmometry (VPO), mass spectrography (MS) and gel permeation chromatography (GPC). After derivatization, the main components of the volatile fraction, representing less than half of the total, were found to be v-hydroxymonocarboxylates, a,v-dicarboxylates, simple alkanoates and 1-alkanols, all with chain lengths ranging from C16 to C24. A second fraction, with an average molecular weight about three times higher, was detected by VPO, MS and GPC. The presence of this important fraction in cork suberin had not been recognized in earlier studies. Both fractions constitute interesting precursors for the elaboration of new materials.
- Structural characterization of lignin from leaf sheaths of “dwarf cavendish” banana plantPublication . Oliveira, Lúcia; Evtuguin, Dmitry V.; Cordeiro, Nereida; Silvestre, Armando J. D.; Silva, Artur M. S.; Torres, Isabel C.Dioxane lignin (DL) isolated from leaf sheaths of banana plant (Musa acuminata Colla var. cavendish) and in situ lignin were submitted to a comprehensive structural characterization employing spectroscopic (UV, FTIR, solid state 13C CP-MAS NMR, liquid state 13C and 1H NMR) and chemical degradation techniques (permanganate and nitrobenzene oxidation). Results obtained showed that banana plant leaf sheath lignin is of HGS type with a molar proportion of p-hydroxyphenyl (H)/guaiacyl (G)/syringyl (S) units of 12:25:63. Most of the H units in DL are terminal phenolic coumarates linked to other lignin substructures by benzyl and Cgamma-ester bonds in contrast to ferulates that are mainly ether linked to bulk lignin. It is proposed that banana plant leaf sheath lignin is chemically bonded to suberin-like components of cell tissues by ester linkages via essentially hydroxycinnamic acid residues. beta-O-4 structures (0.31/C6), the most abundant in DL, comprise mainly S units, whereas a significant proportion of G units is bonded by beta-5, 5-5', and 4-O-5' linkages contributing to ca. 80% of condensed structures in DL.
- Cork suberin as an additive in offset lithographic printing inksPublication . Cordeiro, N.; Blayo, A.; Belgacem, N.M.; Gandini, A.; Pascoal Neto, C.; LeNest, J.-F.Suberin oligomers, isolated from cork (Quercus suber L.), were used as additives in ‘Waterless’ and vegetable-oil ink formulations, in the range of 2–10% w/w. The rheological behaviour of the suberin oligomers as well as of the inks, with and without suberin, were investigated as a function of temperature. It was shown that the addition of suberin induces a decrease of viscosity of both inks. The tack of pristine inks, suberin oligomers and their mixtures were determined at different temperatures: the variation of this parameter as a function of time provided information about the drying kinetics of these formulations. The tack of the ‘Waterless’ ink was found to increase with the introduction of suberin, whereas that of vegetable-oil based counterparts decreased. All the trends observed were interpreted in terms of the differences in composition between the two types of inks. Preliminary printing tests were carried out with the various suberin-containing inks.
- Pulp and paper from" Dwarf Cavendish" pseudo-stemsPublication . Cordeiro, N.; Belgacem, M. N.; Chaussy, D.; Moura, J. C. V. P.